.png)
HDPE – POLYETHYLENE SHEETS & RODS
Product Description
High Density Polyethylene Rod (HDPE) is a FDA Approved material of the highest quality with excellent impact resistance. HDPE has high tensile strength, low moisture absorption and is chemical and corrosion resistant. It is a light weight material that is non-toxic and non-staining and used in a variety of applications and industries.
Typical Application
- • FDA/USDA food handling guidelines
- • Light-weight
- • Chemical and corrosion resistant
- • Low moisture absorption
- • High tensile strength
- • Excellent impact resistance
Sizes Available
- • Thickness available from: 1mm to 200mm
- • Sizes available: 1mt x 2mt, 1.22mt x 2.44mt, 1.2mt x 2mt, 1.5mt x 3mt
- • Rods Dia available from: 16mm dia to 400mm dia
- • Squares available from: 16mm sq to 150mm sq
- • Profiles available as per customer requirement
Typical Applications Include:
- Cutting Boards
- Chemical Tanks
- Light Duty Chain Guides
- Orthotics & Prosthetic Device
- Water Storage
- Food Processing
- Mining Chute Liners
- Thermoforming
- Chair & Belt Guides
- Wear Strips
- Neck Guides
- Corner Tracks
- Spiral Conveyors
- Extruded profiles & Guide Rails
Products
Sheets
Rods
Square Rods
Profiles
Mechanical Properties
Thermal Performance
Electrical Performance
| Performance & Test Conditions | Test Method | Unit | Typical Values |
|---|---|---|---|
| Notched impact strength of cantilever beam, 23°C | ASTM D256 | J/m | 80 |
| Yield tensile strength, 23°C, 50mm/min | ASTM D638 | Mpa | 30 |
| Elongation at break, 23°C, 50mm/min | ASTM D638 | % | 500 |
| The bending strength. 23C, 2mm/min | ASTM 790 | Mpa | 35 |
| Bending modulus, 23°C, 2mm/min | ASTM 790 | Mpa | 1375 |
| Shore hardness D | ASTM D2240 | - | 75 |
| The Density | ISO 1183 | g/cm³ | 0.96 |
